Flagship Flags
1-760-747-7355
San Diego, California

If you don't see a black vertical frame, click  here ,then select Large Pole Accessories from the black frame.

 

Back to Flagpole Accessories Page

External Heavy Duty Trucks

HEAVY DUTY REVOLVING TRUCKS - SINGLE SHEAVE
STANDARD & LARGE


Constructed from heavy cast aluminum with additional reinforcement in all critical areas. The STANDARD TRUCK ASSEMBLY can be used on flagpoles with up to a 4" top diameter and the LARGE on flagpoles up to 71/2'' top diameter shafts. For additional strength, product life and ease of rotation, these trucks utilize upper and lower stainless steel sealed lubricant bearing assemblies on a cast aluminum spindle. The spindle is threaded 1 1/4'' NPT and is tapped 1/2"-13NC for a finial (larger sizes upon request). A machined cast aluminum sheave rotates on a heavy stainless steel axle. Maximum recommended halyard size is 3/8''. 
  TRK-9420

Standard

TRK-9430

Large

MDL Max. Pole Top Diameter Matte
TRK- 9420 4" $155.00
TRK-9430 7 1/2" $230.00

 

HEAVY DUTY REVOLVING TRUCKS - DOUBLE SHEAVE 
LARGE & EXTRA LARGE

Of heavy cast aluminum construction the truck body rotates on upper and lower stainless sealed lubricant bearing assemblies for longer life and greater ease of rotation. The LARGE TRUCK ASSEMBLY can be used on flagpoles with up to 5 1/2" top diameter and the EXTRA LARGE on shafts of up to a 9'' top diameter. The standard cast aluminum spindle is threaded 1 1/4" NPT with the top of the spindle tapped 1/2''-13NC (larger sizes upon request). Maximum recommended halyard size is 3/8".

 

TRK-9965, TRK-9975

Large

TRK-9750

Extra Large

Size Model Max. Top Pole Dia. Sheave Type Matte Finish
Large TRK-9965 5 1/2" Nylon $170.00
Large TRK-9975 5 1/2" Aluminum $180.00
Extra Large TRK-9750 9" Aluminum $370.00

Back to Flagpole Accessories page

Courtesy FCI